by sapo-admin | Feb 8, 2023 | News, Success stories
Sapotech’s first Reveal CAST system in Japan was successfully commissioned at the beginning of January. The first Reveal CAST surface inspection system has been successfully taken into use in Japan. The system was installed on a grinding machine that processes steel...
by Andrea Zambrano | Aug 27, 2019 | Success stories
High free opening rate of ladles is a key factor during steelmaking to keep steel quality high and for safety purposes. To ensure high opening rate, steelmakers use filler sand to avoid a direct contact of the liquid metal with the slide gate-system of the steel...
by Andrea Zambrano | Feb 20, 2019 | Success stories
This is a new customer who wanted to improve its process operation by monitoring the temperature of the ladle outer walls and detect on time any critical heat. Our solution IR cameras with high resolution were used so there was a real time visualization and monitoring...
by Andrea Zambrano | Jan 15, 2019 | Success stories
Our customer was facing some difficulties in its steel production. During the continuous casting process, one of the caster rolls was causing defects on some of the slabs surfaces. Our solution After the root cause of the defect was found, our customer, with the help...
by Andrea Zambrano | Dec 4, 2018 | Success stories
Our customer needed to visualize and inspect the surface condition of their slabs during production from both top and bottom side. He also wished this installation to be done quickly so it wouldn’t interfere or slow down the steel production. Our solution Reveal CAST...
by admin | Apr 30, 2018 | Success stories
One of our key customers wanted to distinguish between the metal and slag that was pouring out of its arc furnace so there could be a clear vision of the molten stream and under safe conditions from the control room. The customer needed specifically to monitor two tap...
